Kubota RTV1100 Parts and Parts Manual PDF

Kubota RTV 1100 Parts

If you’re the proud owner of a Kubota RTV 1100, you understand the importance of keeping this rugged utility vehicle in top-notch condition.

Whether you rely on it for work or play, having access to the right parts and a comprehensive parts manual can be a game-changer.

Understanding Kubota RTV 1100 Parts

Kubota RTV 1100 Parts Diagram

To effectively maintain and repair your Kubota RTV 1100, it’s crucial to have a clear understanding of its parts and their placement. A Kubota RTV 1100 parts diagram is an invaluable resource. It provides a visual representation of every component, making it easier to identify, locate, and replace parts when necessary.

Kubota RTV 1100 Parts Manual PDF

When it comes to detailed information about each part, nothing beats a Kubota RTV 1100 parts manual in PDF format. This comprehensive manual contains specifications, part numbers, and detailed descriptions, ensuring you can quickly find the exact part you need for any repair or maintenance task.

Kubota RTV 1100 Parts List

A Kubota RTV 1100 parts list is a concise inventory of all the available components for your vehicle. This list allows you to cross-reference part numbers, ensuring you order the correct replacement parts every time. Keeping a well-organized parts list handy can save you time and frustration when it’s time to order or replace components.

Essential Kubota RTV 1100 Parts

Kubota RTV 1100 Door Parts

If you use your RTV 1100 in various weather conditions, you’ll want to keep an eye on the door parts. These include handles, latches, and seals to ensure a snug fit. A proper seal helps keep dust, dirt, and moisture out of the cabin, keeping you and your passengers comfortable during the ride.

Kubota Parts RTV 1100 Thermostat

The thermostat is a critical component of your vehicle’s cooling system. If you notice your RTV 1100 running hotter than usual or struggling to maintain a consistent temperature, it might be time to replace the thermostat.

Kubota RTV 1100 Front Wheel Bearing Parts

Front wheel bearings are vital for smooth and safe operation. If you hear unusual noises or experience steering issues, inspect and replace these parts as needed to maintain precise control over your RTV 1100.

Kubota RTV 1100 Body Parts

From fenders to panels and hoods, body parts help protect the vehicle and give it a polished appearance. Keeping these components in good condition not only enhances the RTV 1100’s aesthetic but also ensures its structural integrity.

Rear Axle Parts for a Kubota RTV 1100

The rear axle is a fundamental part of the vehicle’s drivetrain. If you experience issues with power delivery or unusual noises from the rear end, inspect and replace rear axle parts as necessary.

Parts for Hydraulic System on Kubota RTV 1100

Many RTV 1100 models come equipped with a hydraulic system for various attachments. Regular maintenance of hydraulic components is crucial to ensure proper functionality. Pay attention to hoses, seals, and fluid levels to prevent costly breakdowns.

Enhancing Your Kubota RTV 1100

Kubota RTV 1100 Accessories

While maintaining the essential components of your RTV 1100 is crucial, don’t forget about the fun and functional accessories that can enhance your driving experience. From storage solutions to lighting kits and winches, Kubota offers a wide range of accessories designed to meet your specific needs.

  • Snow Plow: A snow plow attachment can be used to clear snow from driveways, parking lots, and other areas
  • Hydraulic Attachments: Kubota offers a range of hydraulic attachments, such as loaders, mowers, and backhoes, that can be easily connected to the vehicle’s hydraulic system
  • Attachments: Other attachments, such as sprayers, spreaders, and sweepers, can also be used with the Kubota RTV 1100 to increase its versatility

Kubota RTV 1100 Hydraulic Attachments

If your work demands additional capabilities, consider hydraulic attachments. These can transform your RTV 1100 into a versatile workhorse, capable of handling various tasks such as snow removal, digging, and lifting heavy loads.

Kubota RTV 1100 Specs

Understanding the specifications of your RTV 1100 is essential for both maintenance and maximizing its potential. Familiarize yourself with details like engine type, transmission, weight capacities, and towing capabilities to ensure you’re using your vehicle to its full potential.

Here are some key specifications for the Kubota RTV 1100:

  • Engine: 24.8 HP, 3-cylinder, liquid-cooled diesel engine
  • Transmission: Variable hydrostatic transmission (VHT-X) with 3 ranges
  • Cargo Bed Capacity: 1,102 lbs
  • Towing Capacity: 1,300 lbs
  • Fuel Capacity: 7.9 gallons
  • Weight: 2,430 lbs

Kubota RTV 1100 Battery Location and Size

A dead battery can bring your RTV 1100 to a halt. Know the battery’s location and size, so you can quickly jump-start it or replace it if needed. Regularly inspect the battery’s terminals and connections to prevent electrical issues.

Kubota RTV 1100 Snow Plow

If you live in a snowy region, a snow plow attachment can make winter maintenance a breeze. Ensure your RTV 1100 is equipped with the necessary components for attaching and operating a snow plow efficiently.

Kubota RTV 1100 Oil Capacity

Proper lubrication is vital for the longevity of your engine. Refer to your owner’s manual for the recommended oil capacity and change intervals. Regular oil changes are among the most important maintenance tasks you can perform.

Kubota RTV 1100 Tires

The condition of your tires directly impacts your vehicle’s performance and safety. Check the tread depth and condition of your RTV 1100’s tires regularly. Consider the terrain you’ll be navigating and choose tires that suit your needs.

Kubota RTV 1100 Attachments

Kubota offers a variety of attachments designed to help you get the most out of your RTV 1100. These can include cargo beds, brush guards, and more. Be sure to follow installation and maintenance guidelines to ensure these attachments remain safe and effective.

Kubota RTV 1100 Side Mirrors

Side mirrors are essential for safe operation, especially when navigating tight spaces or trail riding. Make sure they are correctly adjusted and free from damage.

Kubota RTV 1100 Fuse Box Location

In the event of electrical issues, knowing the location of your fuse box can save you time and frustration. Refer to your owner’s manual for the exact location and fuse layout to troubleshoot electrical problems efficiently.

Kubota RTV 1100 Engine

The engine is the heart of your RTV 1100. Regular maintenance, including oil changes, air filter replacement, and spark plug inspection, is essential to keep it running smoothly. If you encounter engine problems, consult your parts manual for the correct replacement parts.

Kubota RTV 1100 Transmission Rebuild Kit

If you’re experiencing transmission issues, a rebuild kit may be a cost-effective solution. These kits contain the necessary components to overhaul your transmission, restoring it to like-new condition.

In conclusion, owning a Kubota RTV 1100 comes with the responsibility of proper maintenance and occasional repairs. Having a Kubota RTV 1100 parts manual PDF and a clear understanding of your vehicle’s components is essential.

Regular inspections and timely replacements of worn or damaged parts will ensure that your RTV 1100 continues to serve you well, whether you use it for work or play.

Additionally, don’t forget to explore the wide range of accessories and attachments available to enhance the versatility and functionality of your RTV 1100, making it a reliable companion for any task.

How to remove Kubota RTV 1100 Rear Axle

Removing the rear axle on a Kubota RTV 1100 can be a complex and labour – intensive task that requires some mechanical knowledge and the right tools. Before attempting this procedure, it’s important to prioritize safety and, if possible, consult your Kubota RTV 1100’s service manual for specific instructions. Here’s a general overview of the steps involved:

Note: Removing the rear axle is a significant task and may require a helping hand. It’s also important to properly support the vehicle and follow safety precautions.

Tools and Equipment Needed:

  1. Floor jack and jack stands
  2. Lug wrench
  3. Socket set and wrenches
  4. Pry bars
  5. Torque wrench
  6. Penetrating oil (for rusted or stuck components)


  1. Safety First: Ensure the RTV is on a level surface, engage the parking brake, and block the front wheels to prevent any movement.
  2. Raise the Rear of the RTV:
    • Use a floor jack to lift the rear of the RTV off the ground.
    • Secure it in place with jack stands.
  3. Remove the Rear Wheels:
    • Use a lug wrench to remove the rear wheels.
    • Place them aside in a safe location.
  4. Disconnect Brake Components:
    • If applicable, disconnect the brake calipers and hang them from the frame to avoid damaging the brake lines.
    • Remove the brake rotors if necessary.
  5. Disconnect the Driveshaft:
    • Locate the driveshaft connected to the rear axle.
    • Depending on the RTV model, there may be a center bearing or support to remove.
    • Disconnect the driveshaft from the rear differential.
  6. Remove the Rear Differential Cover:
    • Locate the rear differential.
    • Use a socket wrench to remove the bolts securing the differential cover.
    • Carefully pry off the cover, taking care not to damage the gasket if it’s reusable.
    • Allow any oil to drain into a suitable container.
  7. Disconnect the Axle Shafts:
    • Locate the axle shafts that connect to the rear differential.
    • Disconnect the axle shafts from the differential by removing any retaining bolts or clips.
  8. Remove the Rear Axle Housings:
    • Locate the axle housings on each side of the rear axle.
    • Depending on the design, there may be additional bolts or retaining clips holding the axle housings in place.
    • Carefully remove the axle housings, taking note of their orientation.
  9. Remove the Rear Axle Assembly:
    • With the axle housings removed, the entire rear axle assembly should be free.
    • Carefully slide it out from under the RTV.
  10. Inspect and Replace: Once you have the rear axle assembly removed, you can inspect it for damage or wear. If necessary, replace any damaged components before reinstallation.

To reinstall the rear axle, simply reverse the steps above. Make sure to torque all bolts to the manufacturer’s specifications, and refill the rear differential with the appropriate oil before driving the RTV.

Remember that this is a general guideline, and specific instructions may vary depending on your Kubota RTV 1100 model and its configuration. Always consult the service manual or seek professional assistance if you’re unsure about any step in the process.

Where is the fuel filter om a Kubota RTV 1100

The fuel filter on a Kubota RTV 1100 is located on the line from the fuel tank to the electric fuel pump.

The exact location may vary slightly depending on the model and year of the vehicle, but it is generally found in the same area. Here are the steps to change the fuel filter on a Kubota RTV 1100:

  1. Park the vehicle on a level surface and engage the parking brake.
  2. Locate the fuel filter, which is typically beneath the RTV, on the right side, in front of the right rear wheel, near the fuel tank
  3. Before removing the fuel filter, relieve the fuel system pressure by removing the fuel pump fuse or disconnecting the negative battery cable. This step may not be necessary for all models, so consult the vehicle’s manual for specific instructions.
  4. Use a wrench or pliers to loosen the hose clamps on both ends of the fuel filter.
  5. Slide the hose clamps away from the fuel filter and carefully remove the fuel lines from the filter. Be prepared for some fuel to spill out when disconnecting the lines.
  6. Remove the old fuel filter from the vehicle and dispose of it properly.
  7. Install the new fuel filter by connecting the fuel lines to the appropriate ports on the filter. Make sure the lines are securely attached and tighten the hose clamps to prevent any fuel leaks.
  8. Reconnect the fuel pump fuse or the negative battery cable, depending on the previous step.
  9. Start the vehicle and check for any fuel leaks around the new fuel filter. If there are no leaks, the fuel filter replacement is complete.
  10. Dispose of the old fuel filter and any spilled fuel in accordance with local regulations.

How to remove the front glass on a Kubota RTV 1100

Removing the front glass on a Kubota RTV 1100 typically involves a series of steps to ensure safety and proper execution.

Please note that the following instructions are general guidelines, and you should consult your Kubota RTV 1100’s owner’s manual for specific details and safety precautions.

Additionally, wear appropriate safety gear such as gloves and safety glasses during this process.

  1. Prepare Your Work Area:
    • Park the Kubota RTV 1100 on a flat and level surface.
    • Ensure the ignition is turned off, and the key is removed.
    • Engage the parking brake.
  2. Remove Wipers and Arms (if applicable):
    • If your RTV 1100 is equipped with windshield wipers, remove them by loosening the nuts or retaining clips that secure them to the wiper arms. Pull the wipers off the arms.
    • Next, remove the wiper arms by loosening the nuts or retaining clips that secure them to the wiper motor assembly.
  3. Remove Interior Trim (if necessary):
    • Depending on the model, you may need to remove interior trim or panels to access the fasteners holding the front glass.
  4. Locate and Remove Fasteners:
    • Identify the fasteners that secure the front glass to the frame. These are usually screws, bolts, or clips. Refer to your owner’s manual for their exact location.
    • Carefully remove these fasteners. Keep them organized for reinstallation.
  5. Detach the Front Glass:
    • Once all the fasteners are removed, gently and carefully lift the front glass from the frame. It’s essential to have someone assist you to prevent the glass from falling or getting damaged.
  6. Secure or Replace the Front Glass:
    • Depending on why you’re removing the front glass, you may need to secure it or replace it. If you’re replacing it, ensure that the new glass is the correct size and type for your RTV 1100.
  7. Reassemble and Test:
    • Reattach the front glass to the frame and secure it using the previously removed fasteners.
    • Reinstall any interior trim or panels you removed earlier.
    • Reattach the wiper arms and wipers (if applicable).
    • Test the front glass to ensure it’s securely in place and functioning correctly.
  8. Clean and Inspect:
    • Clean the front glass and the surrounding area.
    • Inspect the glass for any defects or damage.
    • Ensure all components are properly secured and functioning as they should.
  9. Final Checks:
    • Double-check that all fasteners are tight and secure.
    • Test the windshield wipers (if applicable) to ensure they work correctly.
  10. Dispose of the Old Glass (if necessary):
    • Dispose of the old front glass responsibly. It’s glass, so be cautious to avoid injury when handling it.

Always prioritize safety during this process, and if you are unsure or uncomfortable with any step, consider consulting a professional mechanic or the Kubota dealer for assistance.

How to replace the starter motor on a Kubota RTV 1100

Tools and Materials Needed:

  1. Socket and wrench set
  2. Screwdrivers
  3. Pliers
  4. New starter motor
  5. Safety gear (gloves and safety glasses)
  6. Jack and jack stands (if necessary)

To replace the starter motor on a Kubota RTV 1100, follow these steps:

  1. Disconnect the battery: Remove the negative cable from the battery to prevent any electrical accidents during the replacement process
  2. Locate the starter motor: The starter motor is typically located on the side of the engine, near the transmission or flywheel. Refer to your Kubota RTV 1100’s manual for the exact location.
  3. Remove the electrical wires: Carefully disconnect the electrical wires connected to the starter motor. These wires may be secured with nuts or bolts, so use the appropriate tools to remove them.
  4. Remove the mounting bolts: The starter motor is held in place by mounting bolts. Use a wrench or socket set to remove these bolts and set them aside in a safe place.
  5. Take out the old starter motor: Gently pull the old starter motor away from the engine, being careful not to damage any surrounding components. Set the old starter motor aside.
  6. Install the new starter motor: Position the new starter motor in place, aligning the mounting holes with the holes in the engine. Insert and hand-tighten the mounting bolts to secure the starter motor.
  7. Reconnect the electrical wires: Attach the electrical wires to the appropriate terminals on the new starter motor. Ensure they are securely fastened.
  8. Reconnect the battery: Reattach the negative cable to the battery, ensuring a tight connection.
  9. Test the new starter motor: Start the Kubota RTV 1100 to verify that the new starter motor is functioning correctly. If the engine starts without any issues, the replacement was successful.

What size tire chains are used on a Kubota RTV 1100

The tire chains used on a Kubota RTV 1100 can vary depending on the tire size and the specific model. Here are some options for tire chains that may fit a Kubota RTV 1100:

  • Kubota RTV V-Bar 9″ Tire Chains Size B by Kolpin Powersports
    • Designed to fit most UTV models with tire sizes up to 25×8-12 / 25×8-14.
    • Features hardened V-Bars attached to the 4-link 9″ cross chains for excellent traction.
  • Kubota RTV V-Bar 10″ Tire Chains Size C by Kolpin Powersports
    • Fits most UTV/SxS models with tire sizes up to 26×10-12 / 26×11-14.
    • Durable steel construction and long-lasting zinc plating.
  • Diamond-shaped skidder type snow chains
    • These chains may be suitable for use on all four tires of the Kubota RTV 1100, but the specific tire size compatibility is not mentioned in the search results.
  • Universal Mounts
    • Some tire chains may have universal mounts that can fit various ATV/UTV/SxS models, including the Kubota RTV 1100.

It is recommended to check the tire size of your Kubota RTV 1100 and consult with a tire chain manufacturer or a Kubota dealer to determine the appropriate size and type of tire chains for your specific model.

How to change the fuel filter on a Kubota 1100 RTV

Changing the fuel filter on a Kubota 1100 RTV is a relatively straightforward process.

The fuel filter is a crucial component of the vehicle’s fuel system, as it helps keep contaminants out of the fuel that can damage the engine. Here are the steps to change the fuel filter on a Kubota 1100 RTV:

Safety Precautions:

  1. Ensure the vehicle is parked on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Disconnect the battery to prevent accidental starting.

Tools and Materials Needed:

  1. New fuel filter
  2. Wrench or socket set
  3. Pliers
  4. Safety goggles
  5. Gloves
  6. Drain pan or container


  1. Locate the Fuel Filter: The fuel filter on a Kubota 1100 RTV is typically located along the fuel line between the fuel tank and the engine. It may be inside a housing or a fuel filter assembly. Refer to your vehicle’s manual for the exact location.
  2. Release Fuel Pressure: Before you start working on the fuel filter, you need to release the pressure in the fuel system. To do this, locate the fuel pump fuse or relay in the vehicle’s fuse box and remove it. Then, crank the engine for a few seconds to use up any remaining fuel pressure. This step is important to prevent fuel from spraying when you disconnect the fuel lines.
  3. Disconnect Fuel Lines: Wear safety goggles and gloves to protect yourself from fuel spillage. Place a drain pan or container underneath the fuel filter to catch any spilled fuel. Use pliers or a wrench to loosen the clamps securing the fuel lines to the filter. Carefully remove the fuel lines from the filter. Be prepared for some fuel to spill, so have rags or paper towels ready.
  4. Remove the Old Fuel Filter: Use a wrench or socket set to remove any bolts or mounting brackets that hold the fuel filter in place. Once these are removed, you can take out the old fuel filter from its housing.
  5. Install the New Fuel Filter: Insert the new fuel filter into the housing or filter assembly. Make sure it is oriented correctly with the arrow on the filter pointing in the direction of fuel flow (typically towards the engine). Reattach any bolts or mounting brackets to secure the filter in place.
  6. Reconnect Fuel Lines: Slide the fuel lines back onto the filter, and use pliers or a wrench to secure the clamps. Ensure that the connections are tight to prevent fuel leaks.
  7. Prime the Fuel System: Reinstall the fuel pump fuse or relay in the fuse box. Turn the ignition key to the “On” position (do not start the engine) and wait for a few seconds to allow the fuel system to pressurize. This will help prime the new filter.
  8. Check for Leaks: Visually inspect the fuel filter and the connections for any signs of leaks. If you see any, tighten the connections as needed.
  9. Start the Engine: Start the engine and let it run for a few minutes to ensure proper fuel flow. Check again for any fuel leaks.
  10. Cleanup: Dispose of the old fuel filter and any spilled fuel properly. Remove the drain pan or container from underneath the vehicle.
  11. Reconnect the Battery: Reconnect the vehicle’s battery to restore power.

How to replace front wheel bearings on a Kubota RTV 1100

To replace the front wheel bearings on a Kubota RTV 1100, follow these steps:

  1. Prepare the vehicle:
    • Park the RTV 1100 on a level surface and engage the parking brake.
    • If necessary, remove the front wheel by loosening the lug nuts and lifting the wheel off the ground.
  2. Remove the axle shaft:
    • Turn the front hub in the direction of the cab to free the shaft.
    • Pull the axle shaft from the hub.
  3. Disconnect the lower ball joint and strut:
    • Remove the lower ball joint from the hub.
    • Remove the strut from the hub.
  4. Separate the front hub:
    • Remove the center hub before the housing will separate
    • Use a bearing splitter to grab behind the bearing and pull the bearing from the hub
    • Alternatively, you can use another method to remove the bearing from the hub
  5. Install the new wheel bearing:
    • Place the new wheel bearing into the hub.
    • Ensure the bearing is properly seated and aligned.
  6. Reassemble the front hub:
    • Reinstall the center hub.
    • Reconnect the lower ball joint and strut to the hub.
  7. Reinstall the axle shaft:
    • Insert the axle shaft into the hub.
    • Turn the hub in the opposite direction of the cab to secure the shaft.
  8. Reinstall the front wheel:
    • If you removed the front wheel, place it back on the RTV 1100.
    • Tighten the lug nuts to the manufacturer’s specifications.
  9. Test the front wheel bearings:
    • Take the RTV 1100 for a short test drive to ensure the front wheel bearings are functioning properly.

You can purchase replacement wheel bearings for the Kubota RTV 1100 from various sources, such as Amazon. All Balls Racing offers a range of wheel bearing kits for Kubota RTV models.